Description: This feature class is part of the Cadastral National Spatial Data Infrastructure (NSDI) CADNSDI publication data set for rectangular and non-‐rectangular Public Land Survey System (PLSS) data set. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-‐ Attribute section of this metadata describes these components in greater detail.
The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis.
Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally.
Copyright Text: FGDC Cadastral Subcommittee, BLM AZSO Cadastral and GIS staff, GCDB, IHS Premier Data Services (Contractor).
Description: This feature class is part of the Cadastral National Spatial Data Infrastructure (NSDI) CADNSDI publication data set for rectangular and non-‐rectangular Public Land Survey System (PLSS) data set. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-‐ Attribute section of this metadata describes these components in greater detail.
The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis.
Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally.
Copyright Text: FGDC Cadastral Subcommittee, BLM AZSO Cadastral and GIS staff, GCDB, IHS Premier Data Services (Contractor).
Color: [230, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 14 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Name: BLM AZ PLSS First Division Section (Polygon)
Display Field: PLSSID
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This feature class is part of the Cadastral National Spatial Data Infrastructure (NSDI) CADNSDI publication data set for rectangular and non-rectangular Public Land Survey System (PLSS) data set. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-‐ Attribute section of this metadata describes these components in greater detail. The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis. Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally.
Copyright Text: FGDC Cadastral Subcommittee, BLM AZSO Cadastral and GIS staff, GCDB, IHS Premier Data Services (Contractor).
Color: [255, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 10 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Name: BLM AZ PLSS Second Division Aliquot (Polygon)
Display Field: PLSSID
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class.
This feature class is part of the Cadastral National Spatial Data Infrastructure (NSDI) CADNSDI publication data set for rectangular and non-‐rectangular Public Land Survey System (PLSS) data set. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-‐ Attribute section of this metadata describes these components in greater detail.
The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis.
Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally.
Copyright Text: FGDC Cadastral Subcommittee, BLM AZSO Cadastral and GIS staff, GCDB, IHS Premier Data Services (Contractor).
Description: This feature class is part of the Cadastral National Spatial Data Infrastructure (NSDI) CADNSDI publication data set for rectangular and non-‐rectangular Public Land Survey System (PLSS) data set. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-‐ Attribute section of this metadata describes these components in greater detail.
The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis.
Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally.
Copyright Text: FGDC Cadastral Subcommittee, BLM AZSO Cadastral and GIS staff, GCDB, IHS Premier Data Services (Contractor).
Color: [115, 115, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This feature class is part of the Cadastral National Spatial Data Infrastructure (NSDI) CADNSDI publication data set for rectangular and non-rectangular Public Land Survey System (PLSS) data set. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-‐ Attribute section of this metadata describes these components in greater detail. The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis. Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally.
Copyright Text: FGDC Cadastral Subcommittee, BLM AZSO Cadastral and GIS staff, GCDB, IHS Premier Data Services (Contractor).